3.Remove the duplexing unit of the printer (if equipped) by pushing inward on the green tabs to the left and right of the unit (as shown). Grasp and pull the duplexing unit out of the printer.
4.If paper is jammed around the fusing unit, lift up on the fuser release levers (#1 in the diagram) and remove any jammed paper from the fuser by pulling up and out of the printer.
5.Return the fuser release levers to their original positions and reinsert the duplexing unit (if equipped). Be sure to latch the duplexing unit back into place by sliding the two green tabs outward.
