GCC Printers 21 Series manual

The Page Setup Window contains the following options for selection:

Paper Size: Selects the Paper Size being printed to. This pull-down menu brings up a list of paper sizes supported by the Elite 21 printer

Paper Source: Specifies which paper tray the paper is to be drawn from. The options on the pull-down menu are as follows:

Auto Select - Sends job to the tray on the printer holding the paper size specified in the document.

Envelope Feeder - Sends the job to the envelope feeder. Greyed out unless the feeder is installed.

Manual Feed - Sends the job to the Multi-

Purpose Feeder (Tray 1).

Tray 1 - Sends the job to the Multi-Purpose

Feeder (Tray 1) of the printer

Tray 2-4- Sends the job to the standard lower paper tray of the printer (Tray 2) or an additional lower paper tray (Tray 3-4), if present.

Orientation: Selects the page orientation, Portrait or Landscape, by clicking on the appropriate radio button.

Margins: Selects left, right, top and bottom margins for the document.

After making all necessary selections in this window, click Finish to accept the settings and apply them to the document.

4-12