The following items can be selected in this window:

Paper Reserve: Sets Paper Reserve to Enabled or Disabled. Paper Reserve allows the printer to automatically switch from one paper tray to the next if the first tray runs out of paper.

Collation in Sets whether job collation is handled by the printer or by the computer.

Printer: This setting should match the Collation Mode setting on the printer’s Configuration menu.

To change these settings, click on the item you wish to change on the list at the top of the window. The lower window will then allow you to change the options for the particular feature you have selected. Click Apply and OK when making any changes.

The fourth tab in the Properties window brings up the PostScript window. This window allows the PostScript Output Format to be changed. We recommend using the “PostScript (Optimized for Speed)” setting. If errors occur with your documents, try switching to “PostScript (Optimize for Portability - ADSC)” setting.

Once all Properties options are properly set, click OK to return to the Print dialog window. Click OK to send the job to the printer.

3-18

Page 99
Image 99
GCC Printers 21 Series manual