Bindery Mode).

Note: If you receive a message asking you to login to a server with Bindery connections, the server you are attached to does not have Bindery Mode enabled. Follow the procedures in Step 1 (Confirm Bindery Context) or log onto a server with Bindery Services activated.

From the Available Options screen, select Quick Setup and press the return key. Use Quick Setup to connect your Print Server, Print Queue and Printer correctly. You can modify these later if you need to.

Select Print Server and press the N key to modify the entry.

Enter the name of the print server in the Print Server field and press the Return key.

Note: The print server name is printed under the Novell Network Information on the printer’s Network Status Page. The factory default name consists of GCC, an underscore and a six-digit number (i.e. - GCC_123456).

Press the ESC key to move to the New Printer field. Enter a name and press the Return key.

Press the ESC key to move to the New Print Queue field. Enter a name and press the Return key.

Press the ESC key to move to the Printer Type field and press the Return key. From the list of printer types, select Other/Unknown and press the Return key.

When you are finished, press the U key to save the configuration. Repeat these steps for each file server that the printer server services.

To view, add, delete, or modify print servers or queues after the initial setup, access PCONSOLE again and select either the Print Queues or Print Servers option on the Available Options screen.

7-21

Page 176
Image 176
GCC Printers 21 Series manual