Appendix C: Interface connector pinouts
Use the following pinouts and descriptions of the various printer interface connectors for purchase or assembly of a new cable.
Bi-directional Parallel (nybble mode)
PIN | SIGNAL | DESCRIPTION | DIRECTION |
1 | /STROBE | Data Strobe | In to Printer |
2 | D1 | Data Bit 1 | In |
3 | D2 | Data Bit 2 | In |
4 | D3 | Data Bit 3 | In |
5 | D4 | Data Bit 4 | In |
6 | D5 | Data Bit 5 | In |
7 | D6 | Data Bit 6 | In |
8 | D7 | Data Bit 7 | In |
9 | D8 | Data Bit 8 | In |
10 | /ACK | Acknowledge | Out from Printer |
11 | BUSY | Busy | Out |
12 | PERROR | Paper Empty | Out |
13 | SELECT | Select Out | Out |
14 | /AUTOFD | Autofeed | In |
15 | NC | Not Used |
|
16 | GND | Signal Ground |
|
17 | CGND | Chassis Ground |
|
18 | NC | Not Used |
|
GND | Signal Ground |
| |
31 | /INIT | Initialize | In |
32 | /FAULT | Printer Fault | Out |
NC | Not Used |
| |
36 | /SELECTIN | Select In | In |