3.Paper Handling (continued)
•Tray 2 Size: Specified the default paper size used in Tray 2. Default is Autosense, which allows the printer to automatically determine the page size based on the tray’s sensors.
•Tray 2 Type: Specifies the default paper type used in Tray 2. Same as options for Tray 1.
•Tray 3 Size/Tray 3 Type: Same as options for Tray 1 and 2. These items only appear if one optional lower paper feeder (Tray 3) is installed.
•Tray 4 Size/Tray 4 Type: Same as options for Trays 2 and 3. These items only appear if two optional lower paper feeder (Trays 3 and 4) are installed.
•Manual Feed: Specifies whether manual feed jobs can be sent to the printer or not. Default is Disabled.
•Duplex: Specifies whether or not jobs are printed
•Duplex Binding: Specifies whether duplex jobs should be printed so that the sheets can be bound at the Long Edge or the Short Edge. This menu item only appears if the optional Duplexing Unit is installed (standard on the Elite 21 DN and SE models).
•Override A4/Ltr.: Allows the printer to automatically substitute Letter paper when A4 is specified, and vice versa. Default is Disabled.
4.Print Quality
This menu controls items related to print quality. Items can be changed by using the Value key and pressing Select to confirm the change. The items are as follows:
•Resolution: Controls the default resolution (600 or 1200 dpi) unless otherwise specified in the document.
•Toner Density: Controls the amount of toner put down on the page. The default value is 3, with options available from 1 (lightest) to 5 (darkest).
