GCC Printers 21 Series manual

Paper Source: Specifies which paper tray the paper is to be drawn from. The options on the pull-down menu are as follows:

Auto Select - Sends job to the tray on the printer holding the paper size specified in the document.

Tray 1 - Sends the job to the Multi-Purpose

Feeder (Tray 1) of the printer

Tray 2-4- Sends the job to the standard lower paper tray of the printer (Tray 2) or an additional lower paper tray (Tray 3-4), if present. Trays that are not installed are greyed out.

Envelope Feeder - Sends the job to the enve- lope feeder. Greyed out unless the feeder is installed.

Manual Feed - Sends the job to the Multi- Purpose Feeder (Tray 1). You will be prompted to press the Select button on the front panel before the job is printed.

This pull-down menu also contains selections for Paper Type (Plain Paper, Preprinted, Letterhead, Transparency, Prepunched, Labels, Bond, Recycled, Color, Card Stock, Rough, Normal 1, 2 and 3 and Thick 1 and 2). Select the appropriate type for each source, or use Auto Select to automatically select the paper type.

These settings are used to automatically direct output to the correct tray. For example, if the Tray 1 Type on the printer’s front panel has been set to “Letterhead,” selecting “Letterhead” from this menu will automatically send the job to Tray 1.

The Paper Source options also allow a different source to be specified for the first page of a document than for the remaining pages. This is useful when printing correspondence with the first page on letterhead and remaining pages on plain paper, for example. To print the first page from a different source, select a Paper Source for both the “First Page From” and “Remaining From” categories. Otherwise, select “All From” to print all pages from the same tray.

2-24