A&D HC-3Ki, HC-15Ki, HC-30Ki, HC-6Ki manual Command List, Acknowledgment and Error Codes

Command List

Command					Definition			Notes
@	Start / stop continuous data transmission.
A	Same as				key.			Key command
		RESET
D	Set a known tare weight.							“D,1.23CRLF” sets the tare
								weight as "1.23kg".
E	Store the unit weight and other values in use to							Refer to the data format.
	ID memory.							Refer f-01-05
F	Recall a unit weight from ID memory.							“F12CRLF” recalls from ID12.
G	Set a known unit weight.							“G,0.123CRLF” sets the unit
								weight as "0.123g" (or "0.123 lb").
J	Same as the						key.	Key command
			TOTAL
K	Same as the			key.				Key command
			M+
Q	Send data immediately.							Data depends on f-06-02
S	Send stable data after accepting command.
T	Same as the					key.		Key command
			TARE
X	Request a list of the F-Function parameters.							The last data terminates with
Y	Request a list of the ID memory contents.							<EOT> (04H)
Z	Same as the					key.		Key command
			ZERO
ON	Start the scale from power on sequence
?ID	Send the ID number in use.
?QT	Send the pcs (count) data.
?WT	Send the weight data.							Refer to the data format for the
?UW	Send the unit weight in use.
								reply.
?AQ	Send the total (accumulated) M+ memory count
	d t
?AN	Send the number of additions to M+ memory.
?TR	Send the tare weight in use.
?MR	Send the specified ID memory contents.
MR	Store the unit weight and tare weight into the
	specified ID memory.							Refer to the data format for the
								reply.
ML	Store the comparator limits into the specified ID
	memory.
CM	Clear the specified ID memory contents							“CM,1.2CRLF” clears content of
								id12.
?FC	Send the specified F-Function setting.							Refer to the data format for the
FC	Store the specified F-Function setting value.							reply.

Acknowledgment and Error Codes

When the scale receives an external command, it reacts as follows:

‰If the command requests a data reply, the scale will send the data.

For other commands, the scale will send an acknowledgment <ACK><CR><LF> or <ACK> (see F-Function “f-09-02”) upon acceptance of the command.

47