5, 25, 50 or 100 Sample Size
1.The three UNIT WEIGHT BY LED’s should be blinking at this point, if not, press the RESET key. to clear any unit weight. If you are going to use a tare container, place it on the weighing pan.
2. Press the SAMPLE key. Any tare |
| |
container will be automatically tared. | SAMPLE | |
The display will show “add” “10 pcs”. | ||
|
COUNT
888.8.88.10
|
| WEIGHT | UNIT WEIGHT |
If weight isn’t zero, press the TARE. | 0000. | add | |
|
| ||
3. Press the SAMPLE | key to do | Æ 10 Æ 5 Æ 25 Æ 50 Æ 100 | |
|
| ||
through the count size: of 5, 25, 50 | 888.8.88.50 | ||
or 100 pieces. | SAMPLE | ||
The larger the sample size, the more | WEIGHT | UNIT WEIGHT | |
accurate unit weight | registered. | ||
(Example of selecting a sample size | 0000. | add | |
|
| ||
of 50) |
|
|
|
4.Place the selected number of sample pieces on the weighing pan (or in the tared container).
The weight of the pieces will be displayed.
COUNT
888.8.88.50
WEIGHT | UNIT WEIGHT |
0280. | add |
5. Press the ENTER key. | Blinking |
|
The display will show | ENTER |
moment while calculating the unit | |
weight. After a moment the display will |
|
show the count, total weight and unit |
|
weight. |
|
If the “add ##” appears on the unut weight display, then the sample size is not large enough for accurate counting
– add the additional number of sample pieces.
6.You may now begin counting operations for pieces of the same weight.
COUNT
WEIGHT UNIT WEIGHT
0280.
add
COUNT
888.8.88.50
WEIGHT | UNIT WEIGHT |
0280. | 5.61200 |
13
