Tare | A&D HC-15Ki, HC-3Ki, HC-30Ki, HC-6Ki specification

TARE

The TARE key will subtract the displayed container weight.

WEIGHT

1.Remove everything from the weighing pan and press the ZERO key to zero the scale.

2. Place a tare container on the weighing pan. The weight display will show the weight of the container.

3. Press the	TARE	key. Then the
weight display shows “-------”			TARE
and waits for the weighing data to
become stable.

STABLE 880000.

TARE

ENTERED

ZERO

WEIGHT

STABLE 880650.

TARE

ENTERED

ZERO

Container weight

WEIGHT

STABLE 880000.

TARE

ENTERED

ZERO

4.The scale will subtract the weight of the container and the weight display changes to net weight.

The TARE ENTERED indicator will light.

10

Image 12

A&D HC-15Ki, HC-3Ki, HC-30Ki, HC-6Ki manual Tare

Contents

Counting Scale This manual and Marks Contents AWA Audible Weighing Assist Features IntroductionIntroduction Unpacking Parts Overview Setting Up Your Scale Best Conditions For WeighingCalibration ON/OFF Total 880000.880.00000Id-00 Automatic Last Unit Weight Used 888.8.888.00000 Front Panel Overview Turn The Power on and OFF Basic Operations880000.8 Basic Operations Tare Tare To Start Counting Unit Weight By a Sample 888.8.88.10Add Add 888.8.88.50 0000 Add0280 Add 888.8.88.20 0000 Add0112 Add 888.8.882.0 0000Key Unit Weight By Keyboard 888.8.88100000 Lo ut Unit Weight By ID Number Reset0000 Id-00 Id-12 Entering a Tare Weight Using the Keyboard Tare Key888.8.881.0 0615 888.8.-554 888.8-554To Clear Tare Either Store Unit Weight Store Unit Weight by ID NumbersId-00 Clear Id-00 Clear Id-12Clear idall Clearing All ID Memories at Once Unit Weight, Tare & Comparator Limits Memorized Key, the tare and/or comparator limits Using the M+ Memory Adding Using the M+ KeyM+ Memory Function To Erase the Last M+ Addition Automatic M+ Accumulation Mode Viewing the M+ TotalClearing the M+ Total M- Function 88888100 8f-00810 8f-05810Comparator Function To Set the Comparator 888.8 888.8.-102888.8.-198 Viewing Comparator Limits Calibration Procedure Using a Weight 888Cal02888Cal10 Calibration Cal 5001 5000Cal f 5000 5000 9800 Gravity Compensation To Change or View F-Function Settings Function Parameters 00-01 00-0201-01 01-02 Acai Operation & Min. Unit Weight 01-0502-01 02-02 03-01 03-0204-01 04-02 04-05 05-01 05-02 05-04 05-05Comparator 06-01 06-02 06-0306-04 RS-232C Data Output 06-05 09-0109-02 09-X Key 88888828 88888821Acai Function Acai Automatic Operation Acai Manual Operation Pcs OnWeighing Pan Addition Range Stable Acai To Enable/Disable AWA Function Off Mode Setting888.off02 AWA Function 888.of100 888.of150Target Int OP-02 Battery Using OP-02 SLA Battery Charging the Battery 88lo8bat Installation RS-232C SpecificationsOP-03 RS-232C Serial Interface Ascii Data Output Mode Data Output Mode f-06-011100 Data to be Sent f-06-02 Connecting the AD-8121 Printer / Mode 1 or Mode Print Operations SettingsExample of f-06-02settings Baud Rate f-06-04 Connecting the AD-8121 Printer / Mode Command ModeAD-8121 Printout Sample Command List Acknowledgment and Error Codes ‰ Weight Data Data Format ‰ Unit Weight ‰ Store the specified F-Function setting value Using UFC Universal Flex Coms Function Store Text Data into the Scale Memory Examples of PF command and AD-8121 Printout Sample Data Format for the Scale Data OP-04 Installation Comparator Relay Output CircuitMaximum rating of the Relay Output Specifications Model Gravity Acceleration MAP Values of gravity at various locations World map Blank