6. USING THE M+ MEMORY
6-1. The M+ Memory Function
The scale can accumulate count data by pressing the M+ key, or automatically (see the next page). It also keeps track of the number of times you add to the total.
When you view the total by pressing the TOTAL key, you view the number of pieces accumulated and the number of additions (how many times the total was added to). Please see
Adding Using the M+ Key
When stable count data is displayed:
1.Press the M+ key.
The scale will beep and the M+
annunciator will blink for a few seconds.
If the scale beeps 4 times, or the M+ 
indicator did not blink, then refer to the note below.
The M+
indicator will stay ON while there is count in memory.
M+
COUNT
TOTAL 
88.81123
M+
2.Press the M+ key every time you want to add to the count. Remember that you may only add the count data once – the scale must return to near zero before it will let you add again.
The M+ key is accepted only once for every stable count data. Once accepted, the M+ key is prohibited until the display returns to less than +5d (1d = 1 weighing division).
If
To memorize the total count in the ID number, see
To Erase the Last M+ Addition
1. Press and hold the C key, then press | C |
the M+ key – release. |
2.The scale will beep and clear the last M+ addition.
If the scale beeps 4 times, there is no M+ addition to erase.
+
M+
beep
23
