A&D HC-15Ki, HC-30Ki, HC-3Ki, HC-6Ki f-01-01 f-01-02, f-00-01, f-00-02, f-01-04

31
9-2. F-Functions
 “” designates Factory Settings.
F-00-X Weight Unit
Weight Display when the scale is switched on.
See also setting “f-09-01=2”.
0kg (kilograms).
1lb (pounds).
Unit Weight (when “lb” is selected).
0lb as piece weight.
1lb as 1,000 piece weight.
F-01-X Operations
Operation Mode.
0Normal Operation. All features and keys available.
1Simplified Operation. The unit weight registration is by
sample only. All other keys are disabled.
“Add” Sample Request Override.
If the sample weight is too light and the scale asks to “Add”
more sample pieces, using this F-Function, the unit weight
can be entered without adding the requested sample pieces.
Or disable the “Add” Sample Request function.
0“Add” sample request function is disabled. Light unit weight
can be accepted without “Add” more sample request.
1The unit weight can be entered without requested “Add”
sample pieces (via the ENTER key).
2The unit weight cannot be entered without requested “Add”
sample pieces (via the ENTER key).
 “f-01-03” is for factory use and should be “0”.
Display ON Unit Weight – Reset or Last.
When the scale is switched on, the scale can be set to recall
the last unit weight used.
0The unit weight is RESET (cleared) when display comes on.
1The unit weight last used will be entered automatically.
f-01-01
f-01-02
f-01-04
f-00-01
USA Versi on ONL
Y
f-00-02