1-5. Simple Operation Mode
If desired, the HC-iscale can be set in a Simple Operation Mode. Set the F-Function f-01-01 at “1”. In this mode, only front panel keys that would be used in “3-3. Unit Weight By a Sample” counting operations are active. All others will not operate. The following keys are active in Simple Operations Mode:
Keys that will operate in Simple Operation Mode:
| ON | ZERO | TARE | SAMPLE | ENTER | 0~9 | RESET |
| OFF |
| | | | | | |
1-6. kg or lb Weighing Units
The HC-iscale can weigh and register the unit weight in pounds or kilograms. When you switch between the weighing units, any weight amounts being used are also converted.
USA Version ONLY
COUNT
TOTAL 888.8.888.0
M+
To change the weighing units between pounds and kilograms, see F-Function f-00-01. Set at “0” for kg; or at “1” for lb.
Or,
880000.880.00000 
ACAI
Set F-Function f-09-01 to “2” and you can change the weighing units between “kg” and ”lb” by using the ½ key.
1-7. Last Unit Weight Used Feature
There are a number of ways to register a unit weight to count. The HC-iscale has a feature to keep the last unit weight used in memory. This can be handy if you turn the scale off and then want to return to the same unit weight, or you accidentally clear the unit weight by pressing the RESET key.
When a unit weight is registered it is automatically placed in the ID “id-00” and remains there until a new unit weight is entered. It can be recalled by the following:
1. When a unit weight is cleared and the | | UNIT | | | | |
three UNIT | WEIGHT BY | LED’s are | | BY | ID. | KEY- | SAMPLE |
blinking; | | | | WEIGHT | | BOARD | |
| | | | | | | |
2. Press the ID | key. | | | 888.8.8810. |
blinking. | | | |
‘id 00’ will be displayed with | 00 | ID. | | | | | |
| | | | | | WEIGHT | | UNIT WEIGHT |
0000.
id-00
