10. ACAI FUNCTION
10-1. ACAI Automatic Counting Accuracy Improvement
The ACAITM (Automatic Counting Accuracy Improvement) function recalculates the unit weight as more pieces are added to improve count accuracy.
When the scale calculates the unit weight from sample pieces, the more sample pieces that are used, the higher the accuracy.
ACAI Notes
COUNT
88888828
|
| WEIGHT |
| UNIT WEIGHT | ||
|
| 3108. |
| 111000. |
|
|
|
|
|
| |||
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ACAI | ||
You must do the ACAI procedure just after you set the unit weight. The samples must be still on the weighing pan.
Do not take the samples off until the end of the ACAI procedure.
You don’t have to count out the pieces when you add, just stay within the ACAI range.
Continue the ACAI procedure to reach the largest amount that you will be counting.
If you want the most precise counting results for every different batch of the same items, use ACAI every time you start counting the next batch.
The ACAI function is initially set to manual operation when the unit weight is set digitally by the keyboard, by ID memory or using computer via the serial interface. This can be set to the automatic mode. The ACAI mode when the unit weight is entered by ID or digital input is controlled by
10-2. ACAI Automatic Operation
1.To start ACAI automatic operation, unit weight must be registered and the sample still on the weighing pan.
2.Add pieces within the nearest ACAI range (refer to table below). A good rule of thumb is to roughly double the amount on the weighing pan.
COUNT
888.8.88.10
|
| WEIGHT |
| UNIT WEIGHT | ||
|
| 1110. |
| 111000. |
|
|
|
|
|
| |||
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COUNT
88888821
|
| WEIGHT |
| UNIT WEIGHT | ||
|
| 2331. |
| 111000. |
|
|
|
|
|
| |||
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ACAI | ||
37
