A&D HC-3Ki, HC-15Ki, HC-30Ki, HC-6Ki manual 888.8.882.0, 0000, Key

Desired Sample Size Not Using The

SAMPLE

Key

1.The three UNIT WEIGHT BY LED’s should be blinking at this point, if not, press the RESET key. to clear any unit weight. If you

are going to use a tare container, place it on the weighing pan and press the TARE key. Be sure to set the weight display is “0”.

	COUNT
TARE	888.8.881.0
	WEIGHT	UNIT WEIGHT
If weight isn’t zero, press the TARE.	0000.	0.00000

2.Place sample pieces on the weighing pan (or in the tared container).

The weight of the pieces will be displayed.

COUNT

888.8.882.0

WEIGHT	UNIT WEIGHT
0112.	0.00000

3.Use the 0 Æ 9 10-key pad to enter the sample size of the pieces

you placed.

‰If you hit the wrong key, press

the C key to clear and enter again. (Example of setting a sample size of 20)

COUNT

888.8.88.20

WEIGHT	UNIT WEIGHT
0112.	add

4.Press the ENTER key.

The display will show “-------” for a moment while calculating the unit weight. After a moment the display will show the count, total weight and unit weight.

Blinking

ENTER

COUNT

8-------

WEIGHT UNIT WEIGHT

0112. add

If the “add ##” display appears on the unit weight display, then the sample size is not large enough for accurate counting – add the additional number of sample pieces.

5.You may now begin counting operations for pieces of the same weight.

COUNT

888.8.88.20

WEIGHT	UNIT WEIGHT
0112.	5.61200

15