2. Front Panel Overview
8
The M+ annunciator comes ON when Count data is being accumulated.
The SAMPLE TOO LIGHT annunciator comes ON when the unit weight is too light.
WEIGHT Display.
The STABLE annunciator comes ON when the weighing data is stable.
The TARE ENTERED annunciator comes ON when the TARE weight is subtracted.
The TOTAL |
|
|
|
|
annunciator comes |
| The | key | |
ON when the COUNT |
| sends Count, Weight | ||
display is showing the |
| or Unit Weight data. | ||
TOTAL value. |
|
|
|
|
|
|
|
| |
|
| Comparator results, | ||
|
| |||
COUNT (pcs) Display. |
| HI/OK/LO. | ||
|
|
|
|
|
The TOTAL key displays the accumulated data on the count display and also back again.
The M+ key accumulates the Count data.
The ½ key displays comparator limits, works as M- key or toggles the weighing units lb/kg (USA version only).
The 
key sets or recalls target weight to use the AWA function.
The RESET key clears the Unit Weight data in memory (but not in ID memory).
|
|
|
|
|
|
|
|
|
|
|
| F |
|
The | 0 ~ 9 & . |
|
| |||
| ||||||
to the display. |
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
| t | |
The | C key clears |
|
| |||
the display |
|
| ||||
input. |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| n | |
The |
| SAMPLE |
| key is |
| |
|
|
| ||||
used when entering |
| |||||
sample size. | O | |||||
|
|
|
|
| ||
|
|
|
|
| ||
The KEYBOARD key is used when unit weight is to be entered via the
The ZERO annunciator comes ON when the scale is at the center of ZERO.
The ACAI annunciator comes ON when weight is within the ACAI range. When meeting the ACAI addition range, it will blink.
The ON/OFF
key turns the power ON and OFF.
The ZERO key returns the scale to the center of ZERO.
The TARE key subtracts the TARE weight.
The KEYBOARD TARE key allows entering a known TARE weight from the
The annunciator comes ON when the battery is working
The annunciator comes ON when the number of additions to M+ is displayed
The STOREUNITWEIGHT key stores the unit weight on display to ID memory.
UNIT WEIGHT Display.
ID. Number (2 digit) is displayed when storing or recalling unit weight data.
e The ENTER key
enters Unit Weight, Sample Size, ID or other data into the scale from the
The ID key is used when recalling unit weight data from ID memory.
