![](/images/backgrounds/171479/bg1f.png)
Installation
Runco PL-43DHD and PL-50DHD Owner’s Operating Manual 21
PRELIMINARY
3.4 Connections to the PlasmaWall and DHD ControllerProceed as follows to connect the PlasmaWall to the DHD Controller, your video sources,
external controller(s) – if present – and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on
connectors that have them.
• Use the left audio input when connecting mono audio sources.
Connecting the
PlasmaWall to the DHD
Controller
Connect the DHD Controller to the PlasmaWall as shown in Figure 3-3 and described in
the sections that follow.
Figure 3-3. Connecting the PlasmaWall to the DHD Controller
COMBINATIONIN OUTRS-232CANALOG RGB IND-SubINPUT1ANALOG RGB OUTD-SubDIGITAL RGBDVI-DAUDIOAUDIOR
SPEAKER8Ω ~ 16Ω+-INPUT 2AUDIOOUTPUTPb Pr Y
Video
3
IRRS-232 Control
S-Video 1
S-Video 2
HD1HD212
R/Pr G/Y B/Pb
R/Pr G/Y B/Pb H V
DVI 1 DVI 2DVI OutH/VVH
R/Pr G/Y B/Pb
HV
TRIGGERS
RS-232 Out
CAUTION:
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER. NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE CENTER.
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!WARNING:
TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
100-230VAC 50-60 Hz, 165 Watts Max
OUTPUTSINPUTSSYSTEM CONTROL INTERFACEComponent Video
SDI
Option
Serial No
Video Processor / Controller
Model
Runco International
Union City, CA
Made In USA
ANALOGRGB IN(INPUT 1)DIGITALRGB(INPUT 2)RS-232CDHD Controller
RS-232OUT
DVIOUT
RGB-HVOUT