Operation
4.2
Selecting the Input Source
4.3
Setting the PC Display Properties
By default, the PlasmaWall is configured to display the signal received on its RGBHV (ANALOG RGB IN) input. To use the
1. Press MENU and enter the Service Menu passcode.
You must enter a passcode to access the Service menu.
Note
2.Select Service from the Main Menu.
3.Select Display Device from the Service Menu.
4.Press 
to select DVI/HDMI, then press ENTER.
To maximize image quality when using the PlasmaWall with a personal computer, you may need to adjust the display properties of your PC video card. To do this:
1.Choose Settings from the Windows Start menu and click on “Control Panel.”
2.Double click on the Display icon.
3.Click the Settings tab on the display dialog box.
4.Adjust the resolution to 1024x768 or 1280x768 pixels.
30 Runco
