Controls and Functions

1.ON / OFF

Press to turn the projector on or off.

2.IR OUTPUT INDICATOR

Lights when a button is pressed to indicate that an IR signal is being transmitted.

3.ENTER

Press to select a highlighted menu item or confirm a changed setting.

4.Cursor Keys (, , , )

Use these buttons to select items or settings, adjust settings or switch display patterns.

When no menus are present on-screen, the UP and DOWN buttons toggle through the available aspect ratios, in this order:

UP Button = Anamorphic - Standard (4:3) - Letterbox - VirtualWide - Cinema - Virtualwide 2.35

DOWN Button = Virtualwide 2.35 - Cinema - VirtualWide - Letterbox - Standard (4:3) - Anamorphic

Note

Virtualwide 2.35 is available only on CineWide-equipped projectors.

For more information about aspect ratios, refer to Table 4-1.

Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this order:

LEFT Button = DVI 2 - DVI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 - S-Video 1 - Composite

RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB 2 - DVI 1 - DVI 2

5.LIGHT

Press to illuminate the buttons. (Not available on all models.)

6.MENU

Press this button to access the OSD controls, or to exit the current menu and return to the previous one.

7.VIDEO (1)

Press to select Composite video input as the source or to enter the numeric character “1.”

8.COMP (Component) (2)

Press to select Component SD (480i/576i) video input as the source or to enter the numeric character “2.”

Runco VX-2i Owner’s Operating Manual

9

Page 19
Image 19
Runco VX-2i manual On / OFF, Cursor Keys, Video, Comp Component