Runco VX-2i manual Aspect Ratio Settings, Remote Aspect Ratio Control Description Key

Operation

Table 4-1. Aspect Ratio Settings

	Remote
Aspect Ratio	Control		Description
	Key
Anamorphic	ANA			The image is compressed
				vertically, but anamorphic
				software will appear properly
		Active Image Area		proportioned. This is best suited
				for use with 16:9 DVDs and
				HDTV programming.
Standard 4:3	4X3			The input signal is scaled to fit in
				the center of the 16:9 screen.
		Active Image		4:3 is the aspect ratio used by
				computer monitors, standard
		Area		television programming and
				most VHS video cassettes.
Letterbox	LET			The image in the Letterbox
	BOX			mode is stretched vertically; the
				top and bottom portions are
		Active Image Area		“blanked off.” Letterbox is best
				suited for LaserDisc movies or
				non-anamorphic DVDs.
VirtualWide	V-WIDE			A 4:3 image is transformed into
				a 16x9 image.

Cinema	--	The image in the Letterbox
		mode is enlarged to a 16x9
		image and the upper and lower
		portions are compressed.

Virtualwide 2.35	--	A 2.35 image is stretched
		vertically in both directions to fill
		a 16:9 image. Virtualwide 2.35 is
		available only on VX-2i
		projectors equipped with the
		CineWide option (secondary
		anamorphic lens).

Runco VX-2i Owner’s Operating Manual 29