Runco VX-33D Soft Power Button, Pattern Button, Service Port, Usb-B, DVI-DL Dual-Link

Controls and Functions

8.SOFT POWER BUTTON

Press once to turn on the VX-33d. Press it again to put the projector into Standby mode. For a discrete on or off command, you can use the direct access buttons on the remote control (see Figure 2-5).

9.PATTERN BUTTON

Press PATTERN to access the internal test pattern menu. Use arrow keys to select a pattern and press SELECT to confirm. Press PATTERN again to return to the selected source.

10.POWER INPUT (100 to 240 VAC) Connect the VX-33d to power here.

11.SERVICE PORT

For use by authorized service personnel only.

12.USB-B

High-speed service port (for future use).

13.DVI-DL (Dual-Link)

An HDCP-compliant, dual-link digital video input for connecting the output from the DHD Controller.

14.SELECT BUTTON

Press SELECT to confirm your selection of a highlighted choice on the On-Screen Display (OSD).

15.MENU BUTTON

Pressing the MENU button brings up the main VX-33d menu. Also, if you are in an adjustment mode or function, pressing MENU brings the menu back one level.

Runco VX-33d Installation/Operation Manual 7