Runco VX-33D Quick Setup, Installation Overview, Step Procedure For Details, Refer to

Installation

3.2

Quick Setup

Table 3-1gives a quick overview of the VX-33d installation process. The sections following this one provide detailed instructions.

	Note		Installation should be performed by a qualified custom video
			installation specialist.
Table 3-1. Installation Overview
Step			Procedure	For Details, Refer to
				page...
1		Choose a location for the projector		17
2		Install the primary projection lens		22
		If installing a VX-33d/CineWide or VX-33d/CineWide		24
3		with AutoScope: Install fixed CineWide base plate or
		AutoScope lens motor
4		Mount the projector		28
5		Connect the DHD Controller to the projector		29
6		Connect signal sources to the DHD Controller		31
7		Connect external controller to RS-232 port (optional)		36
8		Connect 12-volt trigger outputs to AutoScope lens motor		37
		and/or other equipment (optional)
9		Connect projector, DHD Controller and lens motor (if		38
		present) to AC power and power up
10		For rear-screen and/or ceiling-mount installations, select		39
		the proper picture orientation
11		Primary lens adjustments: projected image size (zoom),		19, 40
		position (shift) and focus
12		Install CineWide anamorphic lens (optional)		41
13		CineWide lens adjustments: position, pitch (angle),		43
		geometry and focus
		Projector calibration: adjust the following for each input;		49 through 56
		save settings when finished:
		• Aspect ratio
14		• Brightness
		• Contrast
		• Color level
		• Tint
		• Input position

16 Runco VX-33d Installation/Operation Manual