INSTALLATION AND SETUP
IF ZOOM LENS: Access to the 3 lens mount
screws is likely blocked by the toothed zoom ring
in front of it. First rotate the zoom ring by hand
until its 3 access holes align with the screws, then
insert the hex socket ball driver through the holes
to loosen the screws-do not remove. See figure to
the right.
STEP 3Rotate the lens barrel slightly
Using both hands, rotate the lens barrel counter-
clockwise until the screw heads align with the larg-
er end of their slots on the lens.
Align zoom gear ring to access 3 screws
-ZOOM LENS-
Rotate Slightly
2-3