Runco VX-4C, VX-6C

OPERATION

3-32

OPERATIONAL PARAMETERS

Password Protect

In Operational Parameters the installer can decide to use password protection by putting check

in the box to the right of the Password Protect item.

New Password

A New Password can be established byselecting the new password item from the menu.

Lock Adjustments

The Lock Adjustments item brings up another sub menu of each type of adjustment that can be

locked globally, such as color, tint, contrast, etc.

Color Balance Setup

In Color Balance Setup, the preset color balance for the ISF DAY and ISF NIGHT presets can

be customized and stored.

ISF C3 Calibration

The ISF 3C splash screen can be configured in the ISF 3C Calibration sub menu. This allows

the installer to enter the customer's name, installer's name, and date of calibration.

Reset Lamp Strike

Reset Calibration Counter allows the installer to zero out the calibration counter that appears in

the information screen. This should be done each time the projector is calibrated. This counter

is separate from the lamp hours and projector hours, it is used to record the time between subse

quent calibrations to the projector.

Shutdown If Fan Fails

The Shutdown if Fan Fails should always be checked to in order to not void the warranty.

Chroma Flare Adjust

The Chroma Flare Adjust is used as a convergence function to correct for large chromatic errors

may occur on screen sizes above 20' wide.

Reset All Parameters

Reset All Parameters puts the projector back to the factory default state. All calibration data is

lost and the projector must be setup from the beginning.

Operational Parameters