Runco VX-4C, VX-6C

OPERATION

OSD (On-screen display)

Press and hold for approximately 1 second to toggle menus on or off (i.e., visible or invis-

ible). Or press followed immediately by to guarantee the correct toggle direc-

tion (useful if you are unsure of the present status). Note that invisible menus are fully function-

al.

NOTES: 1) With OSD on, you can still mute menus, error messages, slidebars, etc. with the

appropriate setting in the OSD Settings menu. 2) The status of the key is displayed in the

LCD window on the rear panel of the projector.

Help

Press for detailed information about any current menu and highlight. Press again to

exit. Press to access the General Help menu consisting of Using Help, Setup, Keys, Source

(Input) Selection and Stat/Pwr LEDs. Press to leave General Help.

Test

Press to display one of the available test patterns. Press again to display the next avail-

able pattern in the sequence. will exit after the last pattern, or press at any time to remove

the current test pattern from the screen and return to the current external source.

NOTE: For a complete list of all test patterns, see the Advanced menu description later in Section

Keypad operating settings (protocols)

The remote keypad and the optional wired keypad both store keypad operating settings (called

protocols) in memory. In some advanced applications, such as when you want to use two sepa-

rate keypads to control two projectors independently, you may want to override the original pro-

tocol set at manufacture (which is "A or B") for one of the keypads. See section 2.12, Keypad

Protocols and Conversion for complete instructions.

OSD*

OFF

ON or

OSD*

Help

Exit

Test

Exit

3-8