Runco VX-4C, VX-6C

OPERATION

MEMORY BANK EDIT - STEP 1

Press to display the main menu. To display the Memory Bank Setup menu, press , or

move the highlight to the Memory Bank Setup option and press . The Memory Bank Setup

menu will appear.

MEMORY BANK EDIT - STEP 2

To edit parameters shown in the Memory Bank Setup menu, select the relevant channel and press

. The Memory Banks menu will appear similar to the sample shown below.

Memory Banks Menu (SAMPLE)

MEMORY BANK - STEP 3

If desired, edit the following channel setups in the Memory Bank menu:

 MEMORY LABEL: An alpha-numeric label can be defined and/or changed here. Memory Bank

names can be up to 12 characters in length.

 BANK: A bank number from 01 to 99 can be changed here. NOTE: If you enter a bank number that

already exists, a dialog message appears indicating that this number is already in use-assign a dif

ferent bank number.

 SWITCHER: “0” represents the projector itself. This will likely always be the case for the

VX-4c/VX-6c.

 SLOT: 1 ( ), 2 ( ), 3 ( ), or 4 ( ) for projector inputs.

 LIST: If checked (default, except for automatically defined banks with unchanged parameters), this

defined bank will then appear in the list available when key is pressed. If unchecked, the

bank must be accessed via on the keypad or via the Auto Source function. NOTE: On-screen

display of the bank list is an option that must be set in the OSD Settings Menu.

 AUTO SYNC: If checked, (default), the projector can automatically locate this bank when an

incoming input signal matches. If not checked, the projector can locate the selected bank only

when it is directly selected via on the keypad-and a change in input signal will not result in a bank

change.

 PROTECT: If checked, all of the image settings for this bank will be disabled. If unchecked

(default), all available settings can be adjusted as desired.

Memory Banks

Memory Label

Bank 3

Switcher 0

Slot 1

List

Auto Sync

Protect

Last Bank

Next Bank

Sync Type Seperate H,V

H Freq -15.73kHz

V Freq -59.94Hz

Interlaced Yes

Enter

Input1 Input2 Input3 Input4

3-17

Chan