Runco XP-103DHD Operation, Turning on the Power 4.2 Setting the Computer Display Properties

4. Operation

1.Turn on your source components.

2.Press the main power switch on the PlasmaWall (see Figure 2-1, Figure 2-2or Figure 2-3). Its standby/on indicator lights red.

3.Set the main power switch at the rear of the DHD Controller (see Figure 2-6)to the “on” position. Its standby/on indicator lights amber.

4.Press the ON button on the remote control (or the ON/STANDBY () button on DHD

Controller front panel) to turn on the system. The power indicator on the DHD Controller lights solid blue; the standby/on indicator turns off.

5. After a brief warm-up period (approximately 10 seconds), the PlasmaWall will display an image.

To maximize image quality when using the PlasmaWall with a personal computer, you may need to adjust the display properties of your computer’s video card. To do this on a Microsoft® Windows®-based PC:

1.Choose Settings from the Windows Start Menu and click on “Control Panel.”

4.1

Turning on the Power

4.2

Setting the Computer Display Properties

PlasmaWall XP Series Installation/Operation Manual 33