Operation
PLUGE patterns vary but generally consist of some combination of black, white and gray areas against a black background. The example above includes two vertical bars and four shaded boxes.
Select Brightness from the Picture menu and press ENTER. Adjust the brightness so that:
•The darkest black bars disappear into the background.
•The dark gray areas are barely visible.
•The lighter gray areas are clearly visible.
•The white areas are a comfortable level of true white.
•The image contains only black, gray and white (no color).
Contrast: On your external test pattern source, select a stepped,
Figure 4-3. Typical Gray Bar Pattern for Adjusting Contrast
Select Contrast and press ENTER. Adjust the contrast to a point just below which the white rectangle starts to increase in size.
Brightness and contrast controls are interactive. A change to one
Note may require a subtle change to the other in order to achieve the optimum setting.
PlasmaWall XP Series Installation/Operation Manual | 41 |
