Runco XP-OPAL50DHD, XP-50DHD, XP-103DHD Serial, PlasmaWall, To/From, DB-9 Female, RJ-11 Male

Installation

Digital Video Connection: The PlasmaWall has a dual HDMI input board, labeled HDMI (SLOT 2). Connect the HDMI output from the DHD Controller to input “A” on this board, using an HDMI-to-HDMI cable.

RS-232 Connection: Connect the Display Control (RS-232) output from the DHD Controller to the SERIAL input on the PlasmaWall. Use a standard, modular telephone cable with RJ11 plugs at both ends. On the PlasmaWall end, use the provided RJ11-to-DB9 adapter. This adapter is wired as shown in Figure 3-5.

	4	RCV DATA		2		PlasmaWall
	3	XMT DATA		3		1	5
		SIG GND
To/From	2			5
DHD			REQUEST TO SEND			6	9
Controller					8
			CLEAR TO SEND			SERIAL
					7
	1, 5, 6	NO CONNECTION			1, 4,
				6, 9

6-position	DB-9 Female
RJ-11 Male

6

1

1

6

Figure 3-5. RS-232 Connection from the DHD Controller to the PlasmaWall

PlasmaWall XP Series Installation/Operation Manual 23