Operation
For each input, the PlasmaWall lets you save image quality settings as presets that you can recall at a later time. You can create up to four presets per input and display mode (resolution and frame rate).
The DHD Controller stores the following display modes in each memory preset:
•480i
•480p
•576i
•576p
•720p/24 Hz
•720p/25 Hz
•720p/30 Hz
•720p/50 Hz
•720p/60 Hz
•1080i/50 Hz
•1080i/50 Hz (Australia)
•1080i/60 Hz
•1080p/24 Hz
•1080p/25 Hz
•1080p/30 Hz
•1080p/50 Hz
•1080p/60 Hz
Use the Memory Presets menu to recall saved image presets, or to save image settings in the “Custom 1” or “Custom 2” memory location. The
On the XP-65DHD and XP-OPAL65DHD, “Custom 2” is labeled
Note “THX.”
You should save changes to any of the following settings to a preset; otherwise they will be lost when a new input source or resolution is selected:
•Brightness
•Contrast
•Color saturation
•Tint
•Sharpness
•Gamma
•Lamp Settings
•Color temperature and white balance
To select a memory preset, press or to highlight it and press ENTER.
To save the settings for the current input and display mode to the Custom 1 or Custom 2/THX memory preset, select it, press or to highlight Save and press
ENTER.
PlasmaWall XP Series Installation/Operation Manual | 47 |