Russound K2 Yes, Yes, Macro, Default, Power Off, Power Off, Power Off, POWER MGT, . MACRO ID, Unassigned, Learned IR, . MACRO ID, Unassigned, BASIC SETUP, SAVE CHANGES

INSTALLER

Programming Menu Instructions

A. MACRO ID – Select and enter the macro ID number.

v.Select and enter Unassigned to clear the Power On command.

3.POWER OFF CMD – Select and enter Yes to program a Power Off command or macro. Select and enter No to disable the Power Off command or macro and skip to SAVE CHANGES (step 4).

a.COMMAND TYPE – Select and enter a command type for the amp/receiver or other device you want to power manage. Choose one of the following options:

i.Select and enter Default to power manage only the amp/receiver using the same command type previously select- ed for the device in BASIC SETUP.

A. KEY FUNCTION – Select and enter the Power Off function.

ii.Select and enter Learned IR to power manage only the amp/receiver using a command stored in the amp/receiver learned source location. (See Learn IR Procedure on page 25.)

A. KEY FUNCTION – Select and enter the Power Off function.

iii.Select and enter a specific device to power manage only that device (e.g., CD, TV).

A. DEVICE CODE – Select and enter the IR device code number from the Reference section of this manual. B. KEY FUNCTION – Select and enter the Power Off function.

iv.Select and enter Macro to power manage multiple devices with a macro. (To build macros, see Macro Editor Procedure on page 38.)

A. MACRO ID – Select and enter the macro ID number.

v.Select and enter Unassigned to clear the Power Off command.

4.SAVE CHANGES? – Select and enter Yes to save changes. Procedure returns to POWER MGT.

37