11.Amp/Receiver Key Configuration (page 24) – By default, the Source key selects sources and the Volume keys adjust the output volume of the amp/receiver. You may wish to reconfigure these keys to perform alter- nate functions. The Amp/Receiver Key Configuration procedure allows you to do this.

12.Source Command Key Configuration (page 30) – This procedure allows you to assign additional or alter- nate functions to the seven command keys on the SaphIR K2 keypad for any source. Each command key can be programmed to perform separate “press” and “press and hold” functions.

13.Copy Configuration (page 40) – In a multiple-keypad system, this procedure allows you to copy all the pro- gramming from the first keypad to all the others in the system. To do this, each keypad must have a unique keypad ID (step 3).

INSTALLER

Programming Overview

1

2

3

Configurable Keys

1FAVORITE PRESET KEYS – User-programmable keys for favorite source programs (page 9)

2SOURCE COMMAND KEYS – Installer-configurable through Source Command Key Configuration (page 30)

3AMP/RECEIVER COMMAND KEYS – Installer-configurable through Amp/Receiver Key Configuration (page 24)

21