INSTALLER
Programming Menu InstructionsPROGRAMMING MENU
The Programming Menu has various levels and consists of submenus, procedures, and features. A procedure is a guided sequence of steps to set feature parameters, such as selecting source names. Once you begin a procedure, the system prompts for the information needed at each step. A feature is a setting for which you must choose a parameter. Together, the feature parameters make up the system configuration.
In the following pages, procedures are identified as either Required, Conditional, or Optional. You must perform all Required procedures to program the basic functions of the SaphIR K2 keypad. You may also need to perform Conditional procedures, depending on the requirements of the installation. Optional procedures are available for programming special functions.
Navigation
The following keys are used to navigate the Programming Menu and set parameters:
SETUP BUTTON – To enter the Programming Menu while the keypad is in normal operating mode, press and release the Setup button (located on the right edge of the keypad). To avoid accidental damage, use a nonmetallic object to press the button. Also use the Setup button to back out of the Programming Menu one level at a time. If you are performing a proce- dure, the Setup button brings you back to the beginning of the procedure. Once you have reached the top level of the Programming Menu, pressing the Setup button brings you back to normal operating mode.
NEXT KEY – Go to next menu/procedure/feature on the same menu level. Not available while performing a procedure.
PREVIOUS KEY – Go to previous menu/procedure/feature on the same menu level. Not available while performing a procedure.
PLUS KEY – Select feature parameter (increment).
MINUS KEY – Select feature parameter (decrement).
PLAY KEY – Enter menu/begin procedure/show current feature setting. While performing a procedure, it is also used to advance to the next feature setting once the current feature setting has been viewed or selected.
22