INSTALLER

Programming Menu Instructions

B. KEY FUNCTION – Select and enter the function you want the prefix command to perform (e.g., Disc, Channel, Preset).

iii.Select and enter a specific device (e.g., CD, TV) to use an IR device code from the built-in library.

A. DEVICE CODE – Select and enter the IR device code number from the Reference section of this manual.

B. KEY FUNCTION – Select and enter the function you want the prefix command to perform (e.g., Disc, Channel, Preset).

iv.Select and enter Macro to configure the prefix command with a macro. (To build macros, see Macro Editor Procedure on page 38.)

A. MACRO ID – Select and enter the macro ID number.

v.Select and enter Unassigned to clear the prefix command.

6.SUFFIX CMD – Select and enter Yes if the source component needs a suffix command after receiving a numeric com- mand. Select and enter No to skip the suffix command and advance to SAVE CHANGES (step 7).

a. COMMAND TYPE – Select and enter a command type for the source. Choose one of the following options:

i.Select and enter Default to use the same command type previously selected for the source in BASIC SETUP.

A. KEY FUNCTION – Select and enter the function you want the suffix command to perform (e.g., Enter, Play).

ii.Select and enter Learned IR to use a learned suffix command not included in the default command type. (See Learn IR Procedure on page 25.) Procedure advances to LEARNED SRC.

A. LEARNED SRC – Select and enter the Learned Source location assigned to the source.

B. KEY FUNCTION – Select and enter the function you want the suffix command to perform (e.g., Enter, Play).

iii.Select and enter a specific device (e.g., CD, TV) to use an IR device code from the built-in library.

33