USER

Optional SRC1 Basic Remote Control

1

1POWER KEY – Turns the keypad on and off. Press and hold for All On or All

Off function.

2

8

3

7

4

6 5

2NUMERIC KEYS – For direct selection of channels or tracks.

3VOLUME UP/DOWN KEY – Raises and lowers the amp/receiver volume.

4COMMAND KEYS – Control the source equipment.

5DIRECT SOURCE SELECT KEYS – Directly select sources 1– 6 controlled by the keypad.

6F1 AND F2 KEYS – Set and select Favorite 1 and Favorite 2 presets.

7CURSOR KEYS – Issue navigation commands for source equipment, allowing movement through menus and program screens.

8INPUT KEY – Scrolls through sources controlled by the keypad. Works the same as the keypad’s Source key.

The optional SRC1 Basic System Remote Control will operate the K2 keypad and sources 1–6 through the keypad. The SRC1 has no built-in programming capability and therefore cannot operate source components directly.

6