![](/images/new-backgrounds/1314603/31460331x1.webp)
ADJUSTMENTS
TO INSTALL BLADE
See Figures 15, 16, 17 and 18.
DANGER:
A
■Remove battery pack from saw.
WARNING:
Failure to remove battery pack from your saw could result in accidental starting causing possible serious personal injury.
■Push down on the saw arm and pull out the lock pin to release saw arm. Raise saw arm to its full raised position. Be cautious, saw arm is spring loaded to raise.
■Loosen the phillips screw on the blade bolt cover until blade bolt cover can be raised. See Figure 15.
■Gently raise the lower blade guard bracket, releasing lower blade guard from notch so that lower blade guard and blade bolt cover can be rotated up and back to expose the blade bolt. See Figure 16.
BLADE BOLT COVER
PHILLIPS SCREW
R O T A T I O N
Fig. 15
LOWER
LOWER BLADEBLADE GUARD GUARD BRACKET
NOTCH |
PHILLIPS
SCREW
| BLADE BOLT | |
| Fig. 16 | |
BLADE | LOWER | |
BLADE GUARD | ||
BOLT COVER | ||
|
| PHILLIPS | |
| SCREW | |
| FLAT (S) | |
| ON SPINDLE | |
TO | INNER BLADE | |
LOOSEN | ||
WASHER WITH | ||
| ||
| DOUBLE "D" FLATS | |
| R O | |
| T A T I O N | |
| TO | |
| TIGHTEN | |
| BLADE | |
BLADE BOLT | ||
| OUTER BLADE WASHER | |
| WITH DOUBLE "D" FLATS | |
| Fig. 17 |
Page 16