OPERATION
WARNING:
Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.
TO REMOVE BATTERY PACK
See Figure 32.
■Locate latches on each side of battery pack and depress to release battery pack from your saw.
■Remove battery pack from your saw.
APPLICATIONS
After all parts have been assembled properly and adjustments have been made to saw, battery pack can now be attached to saw.
TO INSTALL BATTERY PACK
See Figure 32.
■Place battery pack in your saw. Align raised rib on battery pack with groove inside saw.
(Use only for the purposes listed below)
■Cross cutting wood and plastic.
■Cross cutting miters, joints, etc. for picture frames, moldings, door casings, and fine joinery.
Note: The carbide tipped blade provided is fine for most wood cutting operations. For fine joinery cuts or cutting plastic, use one of the accessory blades available from your Ryobi dealer.
3 0
31.62 | 4 5 |
DEPRESS LATCHES TO | LATCHES |
RELEASE BATTERY PACK |
BATTERY
PACK
Fig. 32
WARNING:
Before starting any cutting operation, clamp or bolt your compound miter saw to a workbench. Never operate your miter saw on the floor or in a crouched position. Failure to heed this warning can result in serious personal injury.
WARNING:
Do not attempt to operate this tool until you have read thoroughly and understand completely all instructions, safety rules, etc. contained in this manual. Failure to comply can result in accidents involving fire, electric shock, or serious personal injury. Save operator's manual and review frequently for continuing safe operation, and instructing others who may use this tool.
■Make sure the latches on each side of your battery pack snap in place and battery pack is secured in saw before beginning operation.
CAUTION:
When placing battery pack in your saw, be sure raised rib on battery pack aligns with groove inside saw and latches snap into place properly. Improper assembly of battery pack can cause damage to internal components.
WARNING:
Remove battery pack from tool when not in use, changing blades, or making adjustments.
Page 23
