TROUBLESHOOTING

ENGINE WILL NOT START

C A U S E

On/Off Stop Control is in OFF position Empty fuel tank

Primer bulb wasn't pressed enough Old fuel

Fouled spark plug

Plugged spark arrestor

A C T I O N

Move On/Off Stop Control to ON Fill fuel tank with new fuel

Press primer bulb fully and slowly 10 times Drain gas tank and add fresh fuel Replace or clean the spark plug

Clean or replace spark arrestor

ENGINE WILL NOT IDLE

C A U S E

A C T I O N

Air filter is plugged

Replace or clean the air filter

Old fuel

Drain gas tank and add fresh fuel

Improper carburetor adjustment

Adjust carburetor

 

 

ENGINE WILL NOT ACCELERATE

C A U S E

A C T I O N

Old fuel

Drain gas tank and add fresh fuel

Improper carburetor adjustment

Take to an authorized service dealer for adjustment

Cutting attachment bound with grass

Stop the engine and clean the cutting attachment

Dirty air filter

Clean or replace the air filter

Plugged spark arrestor

Clean or replace spark arrestor

 

 

ENGINE LACKS POWER OR STALLS WHEN CUTTING

C A U S E

A C T I O N

Old fuel

Drain gas tank and add fresh fuel

Improper carburetor adjustment

Take to an authorized service dealer for adjustment

Fouled spark plug

Replace or clean the spark plug

Plugged spark arrestor

Clean or replace spark arrestor

 

 

CUTTING ATTACHMENT WILL NOT ADVANCE LINE

C A U S E

A C T I O N

Cutting attachment bound with grass

Stop the engine and clean cutting attachment

Cutting attachment out of line

Refill with new line

Inner reel bound up

Replace the inner reel

Cutting head dirty

Clean inner reel and outer spool

Line welded

Disassemble, remove the welded section and rewind

Line twisted when refilled

Disassemble and rewind the line

Not enough line is exposed

Push the bump knob and pull out line until 4 inches

 

(102 mm) of line is outside of the cutting attachment

 

 

CUTTING LINE ADVANCES UNCONTROLLABLY

C A U SE

A C T I O N

Oil, cleaner or lubricant in cutting head

Clean and thoroughly dry the cutting head

 

 

If further assistance is required, contact your authorized service dealer.

26