Ryobi Outdoor RY30130 Starting And Stopping, Operation, Start Position, Run Position, See Figures

OPERATION

STARTING AND STOPPING

See Figures 5 - 7.

TO START A COLD ENGINE:

DO NOT squeeze the throttle trigger until the engine starts and runs.

Lay the trimmer on a flat, bare surface.

PRIME - Press the primer bulb 7 times.

SET the start lever to the START position.

PULL the rope until the engine starts.

Wait 6-10 seconds, then squeeze the trigger to run.

NOTE: Squeezing the throttle trigger releases the start lever to the RUN position.

TO START A WARM ENGINE: PULL the rope until the engine starts.

TO STOP THE ENGINE:

Press and hold the switch in the stop “ ” position until the engine stops.

IGNITION

SWITCH

TRIGGER

LOCK

THROTTLE

TRIGGER

Fig. 5

PRIMER BULB

IGNITION

SWITCH

TRIGGER LOCK

THROTTLE TRIGGER

Fig. 6

START POSITION

START LEVER

RUN POSITION

START LEVER

Fig. 7

11