Saeco Coffee Makers CAP001/A manual 6.13Display messages, 6.14Menu-programmablefunctions

6.13Display messages

A series of messages in addition to those already found in the previous paragraphs, can be shown on the machine’s display (ref. 8a, fig. 1).

STANDBY: it appears when the machine is off (with main switch in position “I”) with the function of automatic switching on / switch- ing off enabled (see “6.14 Menu-programmable functions”).

ANTIFREEZING: it is displayed when the machine is off (with main switch in position “I”) and the program preserving the icing up of boilers is activated (see “6.14 Menu-programmable func- tions”).

RINSING PROGRAMMED: it is displayed when the machine automatically washes the coffee dispenser (see “6.14 Menu-pro- grammable functions”).

ADD COFFEE: it is displayed when during a grinding phase the machine detects no coffee beans inside the hopper (ref. 7, fig. 1).

LOAD THE CIRCUIT: it appears when the machine, during the dispensing of any drink, detects that water is missing from the boilers.

After having checked the direct water supply, press button (^ for the COFFEE version) until the water flows regularly from the water dispensing tube (ref.11, fig.1) and the coffee dispenser (ref.24, fig.1). In the COFFEE version water only flows from the coffee dispensing unit.

PROGRAMMING: it is displayed when machine programming is accessed (see “6.14 Menu-programmable functions”).

EMPTY GROUNDS: it is displayed when the grounds tray (ref. 17, fig. 1) is almost full (the machine has completed the pro- grammed number of dispensing instances).

Other further dispensing instances can be carried out.

OUT OF SERVICE - EMPTY GROUNDS: it is displayed when the grounds tray (ref. 17, fig. 1) is completely full (the ma- chine has supplied the programmed number of dispensing instanc- es).

The machine is locked and no further dispensing is possible until the grounds tray has been emptied.

CLOSE SERVICE DOOR: displayed when the front door (ref. 13, fig. 1) is not properly closed.

INSERT GROUNDS DRAW.: it is shown when the grounds tray (ref. 17, fig. 1) is not correctly positioned.

INSERT DRIP TRAY: displayed when the drip tray (ref. 15, fig. 1) is not correctly positioned.

INSERT BREWING UNIT: displayed when the brewing unit (ref. 25, fig. 1) is not correctly positioned.

BREWING UNIT ERROR: displayed when the brewing unit (ref. 25, fig. 1) incorrectly performs its working cycle; switch ma- chine off and call the AUTHORISED SERVICE CENTRE.

English

SENSOR ERROR 01: displayed when a temperature sensor is out of order. Switch machine off and call the AUTHORISED SERV-

ICE CENTRE.

TEMPER. ERROR 01: displayed when one of the boiler heating elements is out of order. Switch machine off and call the

AUTHORISED SERVICE CENTRE.

DESCALING: it is displayed when the machine requires this type of intervention, having carried out the programmed number of dispensing instances. Switch machine off and call the AUTHOR-

ISED SERVICE CENTRE.

The descaling interventions depend on the machines’ work cycles programmable by the maintenance technician.

MAINTENANCE: it is displayed when the machine requires maintenance having performed the programmed number of dis- pensing instances. Switch machine off and call the AUTHORISED SERVICE CENTRE.

Maintenance interventions are based on the machine’s working cycles, programmable by the maintenance technician.

6.14Menu-programmable functions

The machine can be set by programming the menu; these modifi- cations match the product dispensed to User requirements.

Important

During the programming phase several keys assume a differ- ent function from that applicable during normal use and per- mit:

	(access to	access to the programming menu by keeping the
programming)		key pressed for 5 secs. (the display will show
		“PROGRAMMING”);
	(Enter)	passing from a menu level to the next;
		preparing a datum to be modified;
		confirming a datum or a function;
	(Escape)	cancelling unconfirmed modifications;
		stepping back to the previous menu level until quit-
		ting.
	(Down)	passing to the next item within the same program-
		ming level;
		increasing the value of a datum to be modified.
	(Up)	switching to the previous item within the same
		programming level;
		reducing the value of the datum to be modified.

Several functions also foresee the programming of one or more data (already programmed for standard values).

In order to operate on the data values to be re-programmed it is necessary to:

-Select function.

-Confirm function with key (Enter).

13