English
RINSING PROGRAMMED
This function allows the dispensing of a minimum quantity of hot water (abt 5 cc) by the machine to prevent sediments in the coffee dispenser from forming; this wash is automatically carried out after a programmed time lapse (20 to 240 minutes) from the last dis- pensing of coffee.
-By confirming “ON”, the modification cursor is set on the last digit to the right and its value can be modified through steps of 10 min. at a time;
always confirm possible modifications.
-By confirming “OFF”, the machine doesn’t perform any wash.
N.B.: During the wash the machine displays “RINSING PRO- GRAMMED”;
the wash can also be manually carried out by pressing key for three seconds.
GROUP RINSING
This function allows the washing of the brewing unit (ref. 25, fig. 1), by using the specific tablets (for information on the tablets refer to the authorised service centre), and has been set up so that the user is guided through the various operation phases.
-The process starts from point “GROUP RINSING”.
-Press key ; the display visualises “PUT THE TABLET INTO THE GROUP”.
-Draw the brewing unit out; the display visualises “INSERT BREWING UNIT”.
-Insert tablet in the brewing unit and return the unit in position;
the display shows “CLOSE SERVICE DOOR”.
-Close the door; the display shows “RINSING”.
The machine starts the actual wash cycle at the end of which the display will show “REMOVE THE GROUP AND RINSE IT WITH WATER”.
-Remove the brewing unit; the display shows “INSERT BREWING UNIT”.
-Proceed to wash the brewing unit in running water.
-
-Close the door; the display shows “RINSING COMPLET-
ED PRESS STAR BUTTON”.
Press again key to finally quit the menu and to make the ma- chine ready for use.
GROUP RINSING
CLOCK
AUTOMATIC OPERATION
ON/OFF TIME
COUNTERS
ANTIFREEZING
UNBLOCKING
09:32 M 12 MAR 97
ON
OFF
ON 1: mtwtfss 08:00
OFF 1: mtwtfss 18:00
ON 2: mtwtfss 09:00
OFF 2: mtwtfss 12:30
ON 3: mtwtfss 08:00
OFF 3: mtwtfss 18:00
ON 4: mtwtfss 09:00
OFF 4: mtwtfss 12:30
TOTAL COFFEE XXXXXX
TOTAL WATER XXXXXX
ON
OFF
CODE: 0000
CLOCK
This function allows the setting of the machine’s clock and date device.
-By confirming “CLOCK”, the cursor is positioned on top of the hours that can then be modified.
-After confirming the set time, the cursor moves to the next ele- ment to be modified (the minutes, followed by the day of the week, day, month and lastly the year).
16
AUTOMATIC OPERATION
This function allows to program the automatic switching on and off of the machine, in two different time slots, for each day of the week.
-By confirming “ON”, the machine is
-By confirming “OFF”, the machine can only be switched on and off manually through the main switch (ref. 10, fig. 1). Automatic
-For the programming of time slots and days, see the next func- tion “ON/OFF TIME”.
N.B.: Automatic machine switching on is only possible with the main switch (ref. 10, fig. 1) in position “I”.