Saeco Coffee Makers CAP001/A manual English

To assemble the coffee grinder it is necessary to:

-Completely screw the adjustment ring nut (ref. E, fig. 19), then unscrew it by half a turn.

Important

This last operation is necessary both to avoid the jamming and to prevent damaging the grinders.

E

fig. 19

-Re-position the geared wheel (ref. D, fig. 20) and lock it by tightening the screws (ref. C, fig. 20).

C	C
C	C
E	D
fig. 20

-Re-position the coffee hopper (ref. 1, fig. 21) by first hooking the front part and then rotating it downwards.

Important

Attention should be paid to the positioning of the gasket (ref. F, fig. 21) which must fit properly in the geared wheel (ref. D, fig. 21) and the ring nut (ref. E, fig. 21).

English

-Secure the hopper (ref. 7, fig. 21) by hand-tightening the screws (ref. B, fig. 21).

1
D
B
fig. 21	F	E

-Open the stop slide (ref. A, fig. 22).

-Assemble the cup heating plate, by re-connecting it to the water outlet pipe (ref. B, fig. 11), and the side panels (see “6.16 Disassembling/assembling the cover panels”)

Important

To resume normal machine operations it is necessary to verify the correct adjustment of the grinding.

A

fig. 22

21