Sampo DR-S0426 manual External alarm connector, Gnd, Com

7External alarm connector

External alarm functions only when DVR has been set under recording mode. 4 input ports to receive signals from external alarm and GND port for termination. When external alarm is triggered, currents will be grounded through GND port to activate the external alarm.

a.Texts "ALM" will be displayed on OSD corresponding channel.

b.Relay action.

c.Recording speed will be switch from normal mode to alarm mode (refer to chapter 4 about recording setting).

d.If setting "A" has been set in schedule recording, will only perform recording when

alarm is triggered during schedule "A" period. Terminal connector：

Pin 1-4 ----- ALARM1-ALARM4，Camera alarm input.

GND	----- GND
N.C	----- Relay N.C，Alarm output N.C
COM	----- Relay COM
N.O	----- Relay N.O，Alarm output N.O

20