| C O N T R O L S A N D F U N C T I O N S |
|
|
60Hz: | Boost to bring out kick drum, bass guitar or to add more low |
| end “punch” to a mix. Cutting this frequency can help clean |
| up a muddy sound. |
250Hz: | Adjusts the mid bass range. Boost to add “warmth” to vocals |
| and strings. The cello and the low strings of a rhythm guitar |
| fall into this range. Cut to eliminate overpowering low end. |
1kHz: | Boosting this range enhances vocals, snare drum and per- |
| cussive instruments, while cutting this range may make |
| vocals blend into the background. |
3.5kHz: | Boost to add “bite” to the guitar, vocals or solo instrument. |
| Cut this range to eliminate harshness. |
12kHz: | A proper adjustment here “brightens” the sound, while too |
| much high frequency can make the total sound effect sharp |
| and add unwanted noise and hiss. |
5.SUB LEVEL CONTROL
The SUB (Sub Woofer) LEVEL slide control raises or lowers a mono line level signal to the SUB OUT MONO output. The signal combines the left and right inputs and passes through a low pass filter. Because this is a line level signal, it must be used with a power amplifier and subwoofer speaker or go directly to a powered subwoofer.
NOTE: The VOLUME control acts as a master level control. It regu- lates the sound level of both the speakers and the subwoofer sys- tem together.
6.LINE SWITCH
Depress the LINE switch to its On position to select the audio signal from the LINE IN inputs. Release the LINE switch to its Off position to mute the audio signal from the LINE IN inputs.
7.AUX/CD SWITCH
Depress the AUX/CD switch to its On position to select the audio signal from the AUX/CD inputs. Release the AUX/CD switch to its Off position to mute the audio signal from the AUX/CD inputs.
8.EQ SWITCH
Depress the EQ switch to its On position to activate the preset EQUALIZER slide controls. Release the EQ switch to its Off position to bypass the EQ circuitry.
ENGLISH
7
