Samson DMS80 owner manual Rear Panel, Speaker OUT, Line

C O N T R O L S A N D F U N C T I O N S

Rear Panel

SPEAKER OUTPUTS		SPEAKER IMPEDANCE 8Ω	LINE IN		AUX/CD IN		LINE OUT		SUB OUT
LEFT+	LEFT-	RIGHT- RIGHT+	LEFT	RIGHT	LEFT	RIGHT	LEFT	RIGHT	MONO
										WARNING
										AVIS
										CAUTION
										ATTENTION
SAMSON DESKTOP MONITOR SYSTEM STEREO 40W X2 MODEL:DA80									SERIAL
									NUMBER
		1		2		3		4	5	6	7

ENGLISH

1.SPEAKER OUT

This push-spring terminal strip is the amplified output which powers the speakers. Any non-amplified speakers may be used as long as they are rated to meet a 6 ohm to 8 ohm impedance. There will be no output when headphones are inserted into the headphone jack.

CAUTION: Be sure power to the DA80 is off before connecting the speakers. Be sure none of the wire strands make contact with other speaker terminals or the DA80’s protection circuitry will shut that channel down and no sound will be heard until the wire is removed.

NOTE: Plugging headphones into the front panel headphone jack will mute any signal to the SPEAKER OUTPUTS as well as to the SUB OUT MONO output.

2.LINE IN

The LINE IN jacks accept audio signal input from any equipment with line level outputs. This will include any keyboard or sound mod- ule, line level from any mixer or the output of your computer’s sound processing board. Use the provided shielded cable accessory for connection. There is no separate volume for the LINE IN, so adjust- ments to the equipment connected to the LINE IN jacks may be necessary to balance them with equipment plugged into other inputs.

9