Samson Wireless System Manager for Windows 95 Introduction / Hardware Interconnections

Introduction / Hardware Interconnections

Introduction

Congratulations on your purchase of the Samson Wireless System Manager! This remarkable accessory package for the Samson Synth Series 6 UHF Wireless System includes Windows 95-compatible software and all required hardware for complete computer control and remote monitoring of up to eight Samson UR6D (or UR6DX) dual receivers (for up to sixteen-channel operation). The WSM application also includes advanced features such as RF spectrum analysis and automated channel planning. WSM even allows you to record receiving conditions in real time (both RF and AF levels) and to log the results to disk or print them out.

In these pages, you’ll find full hardware interconnection and software installation instructions, as well as a guided tour through the various screens, menus and options of the Samson Wireless System Manager. You’ll also find a warranty card enclosed—don’t forget to fill it out and mail it! This will enable you to receive online technical support and will allow us to send you updated information about other Samson products in the future.

SPECIAL NOTE: Should any components in your Samson Wireless System Manager ever require servicing, a Return Authorization number (RA) is necessary. Without this number, the unit will not be accepted. Please call Samson at 1-800-372-6766 for a Return Authorization number prior to shipping your unit. Please retain the original packing material and, if possible, return the unit in its original carton and packing materials.

Hardware Interconnections

The Wireless System Manager will work with any Pentium computer (including laptop computers) that is running Windows 95 and has a Sound Blaster 16 sound card installed (note that WSM may not operate correctly with third-party sound cards). 5 megabytes of hard disk space is required for installation, and a minimum of 16 megabytes of RAM is recommended. A 21" color monitor or larger is also recommended, although the program will work on smaller monitors.

There are two hardware interface boxes provided with the Wireless System Manager: the IF6P and IF6R. As shown in the illustrations below, they are essentially identical, except for the “PC” connection on the IF6P (on the right-hand side). The IF6R interface box is required only when you need to remote your receivers 20 feet or more from the computer.

SAMSON
	RECEIVE	SEND
3	WSM
2
1
	Interface IF6P
1	2	3	PC
IN	OUT	IN	OUT

SAMSON
3		WSM
2
		Interface IF6R
	1	2	3
IN	OUT	IN	OUT

PUSH

PUSH

21

3

21

3

IF6P IF6R

1