Samsung 2550 manual Config Netware menu item

Item	Explanation
	You can set this item only when you set
	IP Get Method to Static. This item lets
	you enter the subnet mask manually.
Subnet Mask	Press the scroll button to set the value of
	the 1st byte between 0 and 255, and
	then press the Enter button.
	For the 2nd to the 4th byte, you can set
	the value in the same way.
	You can set this item only when you set
	IP Get Method to Static. This item lets
	you enter the gateway manually. Press
Gateway	the scroll button to set the value of the
	1st byte between 0 and 255, and then
	press the Enter button.
	For the 2nd to the 4th byte, you can set
	the value in the same way.
	Values: Yes, No*
	Configure the Wireless Network
	environments.
Config 802.11b	If you select Yes, the following options
	are available : SSID, Operation Mode,
	Channel, Authentication, Encryption,
	Using Key, KeyType and Key
	See “Configuring the Wireless Network”
	on page E.12
	Values: On*, Off
AppleTalk	This item lets you select whether or not
	you use the AppleTalk protocol. Select
	On to use the protocol
	Values: On*, Off
	This item selects whether you want to
	use the Netware protocol.
Netware	If you select On, you can access the
	Config Netware menu item.
	In the Config Netware menu, you can
	specify the frame type parameter used
	on your network.

3.20 USING THE CONTROL PANEL