Samsung 2550 Config Netware Netware to On. This item lets you, Type parameter, Snap frame type

Item	Explanation
	Values: Yes, No*
	You can set this item only when you set
Config Netware	Netware to On. This item lets you
	select whether or not you set the frame
	type parameter.
	If you select Yes, the IPX Frame Type
	option appears on the display.
	Values:Auto*,EN_8022,EN_8023,EN_II,
	EN_SNAP
	You can select this item only when you
	set Config Netware to Yes. This item
	lets you select IPX Frame Type.
IPX Frame Type	• Auto:You can set the frame type
	automatically.
	• EN_8022: Select this value to use the
	IEEE 802.2 frame type.
	• EN_8023:Select this value to use the
	IEEE 802.3 frame type.
	• EN_II :Select this value to use the
	ETHERNET II frame type.
	• EN_SNAP:Select this value to use the
	SNAP frame type.
Reset Network	This item reboots the network interface
	card.
	This item restores the factory default of
Default Set	the network configuration. This setting
	will only take effect after you have reset
	the printer.
Print Net CFG	This item print a page showing the
	network parameters you set.

3

USING THE CONTROL PANEL 3.21