set value of the selected function is displayed in the slide.
When Select All is selected, the default value (50) returns. If you change the value in the Settings Control screen, it switches to CUSTOM mode automatically.
1)Audio
-Controls audio settings for all input sources.
2)Treble
-Adjusts Treble of the selected display.
3)Bass
-Adjusts Bass of the selected display.
4)Balance
-Adjusts Balance of the selected display.
Settings Control is available only for the displays for which the power status is ON and the default value is 50 when no adjustments are made.
8. Settings Control – Image Lock (PC Analog Only)
1. Click Settings of the main icons and the Settings Control screen appears.
Info Grid shows some basic information necessary to Settings Control.
Note that you cannot change the settings for PC Digital display although you see it in the Grid.
1)Image Lock
-Controls the Image Lock setting only for PC Analog.
2)Frequency
-Adjusts Frequency of the selected display
3)Phase
-Adjusts Phase of the selected display.
4)Position
-Adjusts Position of the selected display.
5)Auto Adjustment
-Adjusts the Audio settings of the selected display.
Settings Control is available only for the displays for which the power status is ON.
9. Troubleshooting
1.The display you wish to control does not appear on the Power Control Info Grid
-Check the connection of RS232C. (Check if it is properly connected to the Com1 port)
-Check the displays to see if any of the other displays connected have the same ID. If more than one displays have the same ID, those displays are not properly detected by the program due to data conflict.
-Check if the Display Set ID is a number between 1 and 6. (Adjust using the Display menu)
Note :
A Display Set ID must be a value between 1 and 6. If the value is out of the range, the MDC system cannot control the display. Samsung Electronics guarantees that this program operates
