SYSTEM MAINTENANCE

ALARMS

The OfficeServ 100, OfficeServ 500, and OfficeServ 7000 systems provide a feature that self-checks for any failures. If a failure does occur in the software or hardware, a fault error will be generated and buffered to an alarm report. During an alarm state every phone with an assigned SYSTEM ALARM button will ring and cause the SYSTEM ALARM button to flash amber. A phone with a display should be used so that the alarm information can be viewed.When an alarm occurs, the user can press the SYSTEM ALARM button to view and scroll through the alarms. This will silence the audible part of the alarm, but the SYSTEM ALARM button will continue to flash until your Service Company views and clears the alarms in the alarm report located in the system software.

N O T E S

36